Deakin: laundry renovation project

Laundry Renovation in Deakin, Canberra | Painting, Tiling and Cabinet Upgrade

This laundry renovation project Deakin Canberra transformed a tired laundry into a functional, low-maintenance space with improved layout, waterproofing and contemporary finishes. Before any work began we completed a site inspection and coordinated with the homeowner to confirm budget, access and the desired final look. The inspection identified worn tiles, outdated plumbing (twin taps), limited storage and a need for reliable waterproofing, these findings shaped the final scope.

Laundry Renovation Project Deakin Canberra:Pre-construction review

During the pre-construction review for the laundry renovation project Deakin Canberra we checked substrate condition, waste locations, ventilation and riser clearances. With the client we agreed to replace the old two-tap set-up with a single mixer, upgrade the floor and wall finishes, install a splashback behind the trough, and build a custom cabinet to maximise storage while keeping the room compact.

what we did in this laundry renovation Project

As part of the laundry renovation project in Deakin, Canberra, our team completed a coordinated program of preparatory and finishing works to modernise the space for everyday use. The tasks carried out on site are listed below:
• Full strip-out of existing fixtures, tiles and the old vanity.
• Substrate preparation and mechanical keying to ensure proper adhesion.
• Professional waterproofing to the laundry floor and wet wall areas.
• Plumbing upgrades including pipe replacement, repositioning of waste, and conversion from two taps to a single mixer.
• New patterned floor tiling and tile returns at the splashback.
• Custom cabinet making for a fitted laundry trough and extra storage.
• Full wall painting with moisture-resistant paint and final fixtures installation.

Our technical approach and quality controls in this laundry project

On this laundry renovation project Deakin Canberra we followed a methodical sequence:
• careful demolition
• substrate repairs
• primer and membrane waterproofing
• pressure-testing of plumbing before any tiles or joinery
Waterproofing was applied to Australian standard detailing around the floor perimeter and trough area and allowed to

cure fully prior to tiling. All plumbing alterations were pressure-tested and visually inspected before concealment. Tiles were set with flexible adhesive and correct joint spacing; grout and silicone seals were used where required to ensure long-term performance.

Design and materials this laundry project

The laundry renovation project Deakin Canberra uses a durable patterned floor tile that resists staining and provides visual interest, paired with a simple painted upper wall to keep the room feeling bright. We selected a compact, heavy-duty laundry trough and custom cabinet face to improve storage while maintaining clear working space. The single mixer reduces plumbing complexity and improves usability. Finishes were chosen for durability, ease of cleaning and compatibility with wet-area maintenance schedules.

Key challenges in the laundry renovation project in Deakin, Canberra and our solutions

Key challenges on the laundry renovation project Deakin Canberra included working within a small footprint while relocating services and ensuring the new cabinet and trough fit without restricting door swing. We solved this by careful measuring, pre-cutting joinery off-site, and staging the plumbing rough-in to align with the new layout. Time-sensitive curing for waterproof membranes and adhesives was managed by staged scheduling and close site supervision to avoid delays.

Project schedule and handover

Work was scheduled to minimise disruption and to allow proper curing and quality checks between trades. The sequence below shows each work stage and the planned duration we used on-site for this laundry renovation in Deakin, these timings reflect the actual programme followed and are designed to keep the job tight while protecting long-term performance.
Timeline :
• Strip-out and demolition : 1 day
• Substrate repairs and mechanical keying :1 day
• Waterproofing (primer, membrane coats and cure) : 3 days
• Plumbing rough-in, waste repositioning and pressure testing : 1 day
• Floor tiling (layout, adhesive set) : 2 days
• Grouting, cleans and tile finishing : 1 day
• Joinery installation (fitted cabinet and trough) : 1 day
• Fixtures, painting and final touch-ups : 1 day
• Final tests, cleaning and client handover : 0.5 day

📸Scroll the gallery to compare the before/after photos from this job:

📍 Ready to refresh your laundry ?

If you’re planning a laundry renovation project in Canberra, whether a small refresh or a full makeover, we can provide a detailed quote and schedule. Our experience with laundry renovations across Canberra ensures practical, durable results that add value and daily convenience. Contact us to discuss scope, timeline and design options.